Refitted lights can make the car more personal, but if handled improperly, it may pose a safety hazard. As a Blowing Mould China Wholesaler, Taizhou Longing recommends that you pay attention to the following four points when changing lights.
1. Professional lamp modification will greatly reduce the chance of spontaneous combustion
The method of remodeling the lighting device in the auto repair shop is simple and rough, and the brightness, angle, distance, height, color temperature, etc. of the lamp illumination cannot be installed and debugged according to the national technical standards, and the stability and safety of the lighting device cannot be guaranteed, and the modification is not performed. Safety inspection means driving on the road. If the headlights suddenly fall off and are skewed, it will be very dangerous.
2. The lights should not be too bright, otherwise the hidden dangers at night will increase.
3. Please refer to the manufacturer's configuration for modification.
In recent years, when the lights are modified, there are angel eyes, devil eyes, etc., by installing lenses to achieve different visual effects, and the color matching is free to choose, so that your car can be more personalized, but in fact In the process of dismantling and reloading, the construction is improper or the craft is lacking. In the later stage, the sealing problem often occurs, causing the headlights to easily fog or enter the water.
3. The source of the modified parts must be regular
More than 50% of the spare parts of the vehicle lighting equipment that are not reliable are modified from the scraps removed from the accident vehicle. The quality cannot be guaranteed, and there is a great safety hazard.
As a Welding Mould Manufacturer , Taizhou Longing suggested that when modifying the lights, be sure to confirm the above four points in advance. This will ensure the safety of the vehicle.
